#ifndef _W25QXX_H__
  #define _W25QXX_H__
#endif
#include <Arduino.h>
#include <SPI.h>
//W25X系列/Q系列芯片列表
//W25Q80  ID  0XEF13
//W25Q16  ID  0XEF14
//W25Q32  ID  0XEF15
//W25Q64  ID  0XEF16
//W25Q128 ID  0XEF17
//W25Q256 ID  0XEF18
#define W25Q80 	0XEF13
#define W25Q16 	0XEF14
#define W25Q32 	0XEF15
#define W25Q64 	0XEF16
#define W25Q128	0XEF17
#define W25Q256 0XEF18

#define NM25Q80 	0X5213
#define NM25Q16 	0X5214
#define NM25Q32 	0X5215
#define NM25Q64 	0X5216
#define NM25Q128	0X5217
#define NM25Q256 	0X5218

extern uint16_t W25QXX_TYPE;					//定义W25QXX芯片型号		   

//#define	W25QXX_CS 		PCout(4)  		//W25QXX的片选信号
#define W25QXX_CS0		digitalWrite(NORFLASH_CS_PIN, LOW)
#define W25QXX_CS1		digitalWrite(NORFLASH_CS_PIN, HIGH)

///////////////////////////////////////////////////////////////////////////
//SPI相关设定
#define SPI_FREQUENCY 30*1000000  //SPI时钟频率，硬件SPI使用
// #define HARDWARE_SPI              //使用硬件SPI
#define SOFTWARE_SPI           //使用软件SPI
#define FLASH_TEST_ENABLE      //使能测试
//端口定义
#ifdef HARDWARE_SPI
      #define ESP32S3
      #ifdef ESP32   //choose ESP32
        #define NORFLASH_CS_PIN         5
        #define NORFLASH_CLK_PIN        18
        #define NORFLASH_MOSI_PIN       23
        #define NORFLASH_MISO_PIN       19
      #endif
      #ifdef ESP32S3  //choose ESP32S3
        #define NORFLASH_CS_PIN         10
        #define NORFLASH_CLK_PIN        12
        #define NORFLASH_MOSI_PIN       11
        #define NORFLASH_MISO_PIN       13
      #endif
#endif
#ifdef SOFTWARE_SPI
        #define NORFLASH_CS_PIN         10
        #define NORFLASH_CLK_PIN        12
        #define NORFLASH_MOSI_PIN       11
        #define NORFLASH_MISO_PIN       14
#endif

//////////////////////////////////////////////////////////////////////////
//指令表
#define W25X_WriteEnable		0x06 
#define W25X_WriteDisable		0x04 
#define W25X_ReadStatusReg1		0x05 
#define W25X_ReadStatusReg2		0x35 
#define W25X_ReadStatusReg3		0x15 
#define W25X_WriteStatusReg1    0x01 
#define W25X_WriteStatusReg2    0x31 
#define W25X_WriteStatusReg3    0x11 
#define W25X_ReadData			0x03 
#define W25X_FastReadData		0x0B 
#define W25X_FastReadDual		0x3B 
#define W25X_PageProgram		0x02 
#define W25X_BlockErase			0xD8 
#define W25X_SectorErase		0x20 
#define W25X_ChipErase			0xC7 
#define W25X_PowerDown			0xB9 
#define W25X_ReleasePowerDown	0xAB 
#define W25X_DeviceID			0xAB 
#define W25X_ManufactDeviceID	0x90 
#define W25X_JedecDeviceID		0x9F 
#define W25X_Enable4ByteAddr    0xB7
#define W25X_Exit4ByteAddr      0xE9

void W25QXX_Init(void);
uint16_t W25QXX_ReadID(void);  	    		//读取FLASH ID
uint8_t W25QXX_ReadSR(uint8_t regno);             //读取状态寄存器 
void W25QXX_4ByteAddr_Enable(void);     //使能4字节地址模式
void W25QXX_Write_SR(uint8_t regno,uint8_t sr);   //写状态寄存器
void W25QXX_Write_Enable(void);  		//写使能 
void W25QXX_Write_Disable(void);		//写保护
void W25QXX_Write_NoCheck(uint8_t* pBuffer,uint32_t WriteAddr,uint16_t NumByteToWrite);
void W25QXX_Read(uint8_t* pBuffer,uint32_t ReadAddr,uint16_t NumByteToRead);   //读取flash
void W25QXX_Write_Page(uint8_t* pBuffer,uint32_t WriteAddr,uint16_t NumByteToWrite);
void W25QXX_Write(uint8_t* pBuffer,uint32_t WriteAddr,uint32_t NumByteToWrite);//写入flash
void W25QXX_Erase_Chip(void);    	  	//整片擦除
void W25QXX_Erase_Sector(uint32_t Dst_Addr);	//扇区擦除
void W25QXX_Wait_Busy(void);           	//等待空闲
void W25QXX_PowerDown(void);        	//进入掉电模式
void W25QXX_WAKEUP(void);				//唤醒
uint8_t W25QXX_Write_Page_Only(uint8_t* pBuffer,uint16_t WriteAdd);