From 84f7fbfdcdb2d1b4e4c9cf4810a74f19d2ca91fb Mon Sep 17 00:00:00 2001
From: lei <3224404793@qq.com>
Date: Fri, 2 Sep 2022 20:58:27 +0800
Subject: [PATCH] 	modified:   .vscode/arduino.json 	modified:  
 src/W25QXXArduino/w25qxx.h

---
 .vscode/arduino.json       |  6 +++---
 src/W25QXXArduino/w25qxx.h | 10 +++++-----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/.vscode/arduino.json b/.vscode/arduino.json
index fa9b95e..2a1b24f 100644
--- a/.vscode/arduino.json
+++ b/.vscode/arduino.json
@@ -1,7 +1,7 @@
 {
-    "configuration": "PSRAM=disabled,FlashMode=qio,FlashSize=4M,LoopCore=1,EventsCore=1,USBMode=hwcdc,CDCOnBoot=default,MSCOnBoot=default,DFUOnBoot=default,UploadMode=default,PartitionScheme=min_spiffs,CPUFreq=240,UploadSpeed=921600,DebugLevel=none",
-    "board": "esp32:esp32:esp32s3",
+    "configuration": "PSRAM=disabled,PartitionScheme=min_spiffs,CPUFreq=240,FlashMode=qio,FlashFreq=80,FlashSize=4M,UploadSpeed=921600,LoopCore=1,EventsCore=1,DebugLevel=none",
+    "board": "esp32:esp32:esp32",
     "sketch": "spi_test.ino",
-    "port": "COM10",
+    "port": "COM4",
     "programmer": "esp32:esptool"
 }
\ No newline at end of file
diff --git a/src/W25QXXArduino/w25qxx.h b/src/W25QXXArduino/w25qxx.h
index aab6aed..0b0a48d 100644
--- a/src/W25QXXArduino/w25qxx.h
+++ b/src/W25QXXArduino/w25qxx.h
@@ -38,7 +38,7 @@ extern uint16_t W25QXX_TYPE;					//
 #define FLASH_TEST_ENABLE      //使能测试
 //端口定义
 #ifdef HARDWARE_SPI
-      #define ESP32S3
+      #define ESP32S3    //使用硬件SPI，需要选择器件
       #ifdef ESP32   //choose ESP32
         #define NORFLASH_CS_PIN         5
         #define NORFLASH_CLK_PIN        18
@@ -53,10 +53,10 @@ extern uint16_t W25QXX_TYPE;					//
       #endif
 #endif
 #ifdef SOFTWARE_SPI
-        #define NORFLASH_CS_PIN         10
-        #define NORFLASH_CLK_PIN        12
-        #define NORFLASH_MOSI_PIN       11
-        #define NORFLASH_MISO_PIN       14
+        #define NORFLASH_CS_PIN         19
+        #define NORFLASH_CLK_PIN        5
+        #define NORFLASH_MOSI_PIN       17
+        #define NORFLASH_MISO_PIN       18
 #endif
 //////////////////////////////////////////////////////////////////////////
 //指令表